Dap 18806 Fire Stop Fire Rated Silicone Sealant, 10.1 Oz, Gray

Description

single component, neutral cure, gun-grade silicone firestopping sealant. Elastomeric, high performance sealant capable of meeting the joint movement requirements in a fire-rated joint. DAP® Fire Stop is tested for up to a four hour F-Rating at independent laboratories and is approved for both through penetrations and joint applications.
Size: 10.1 Ounce
Color: Limestone gray
Elastomeric silicone formulation
Apply in temperatures above 40 degree F
Capable of 25% movement in fire rated joint
Meets ASTM E 814/UL 1479 and UL 2079
Suggested Uses:
Classified for sealing fire-rated service penetrations and construction joints in horizontal and vertical fire separations.
Penetrations:
Steel, copper and EMT pipe
Fiberglass pipe insulation
Construction joints
Cables
Building Assemblies:
Concrete and CMU
Gypsum wallboard
Clean Up:
Immediately remove all excess sealant and smears with Xylol or Toluol before sealant cures. DO NOT use solvents to remove product from skin.
WARNING: This product can expose you to chemicals including Silica crystalline which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65Warnings.ca.gov/